ANOSLE «Centre-Expert»

22.6. Certification Scheme 6c

22.6.1. Scheme 6c involves the following procedures:

-Applicant submits application to product certification body for conducting certification with accompanying technical documentation, which on a mandatory basis shall include the management systems certificate(copy of certificate) issued by the management systems certification body, confirming that the management system complies with requirements defined in the technical regulations;

-  certification body conducts examination of product project;

-    product certification body summarizes the results of analysis of Applicant’s technical documentation including results of examination of product project and issues certificate of conformity to Applicant;

-  common circulation mark to be applied;

-    inspection control over the certified products (control over stability of management system functions).

22.6.2. Applicant shall take all necessary measures to ensure the stability of the management system functioning and production conditions for manufacturing products complying with requirements of technical regulations, forms the technical

documentation and submits application for certification of its products to one of product certification bodies that is accredited for the given type of product.

The application shall indicate the document for which the management system is certified, taking into account that the technical regulation may set one or more documents, for compliance with which management system shall be certified .

Simultaneously, Applicant shall submit the management systems certificate

(copy of certificate).

22.6.3. Certification body shall analyze the technical documentation and examine the product project as per 22.5.4 and at positive results shall prepare a certificate of conformity and issue it to the Applicant.

22.6.4. Applicant shall apply a common circulation mark, unless otherwise established in the technical regulations.

22.6.5. Product certification body shall conduct inspection control over the certified products during the term of the certificate of conformity by testing product samples in the accredited testing laboratory and carrying out analysis of inspection control results by management systems certification body. At positive results of the inspection control, the validity of certificate of conformity is deemed to be confirmed and this fact shall be indicated in the act of inspection control. At negative results of inspection control, the product certification body shall takes one of the following decisions:

-  suspend validity of the certificate of conformity;

-  cancel validity of the certificate of conformity.

Decisions taken by the product certification body shall be made known to Applicant. Product certification body shall make appropriate records in the Unified register of issued

certificate of conformity and registered declaration of conformity as per the single form . 22.6.7. When making changes to the design (composition) of products or

its production technology, which may affect the conformity of product with requirements of the technical regulations, Applicant in writing and in advance notify the products certification body which decides on the need for new tests and (or) the analysis of the production condition.